The most critical concept when it comes to talking about radiation is the distinction between ionizing and non-ionizing radiation. Ionizing radiation is the dangerous stuff and includes x-ray radiation, gamma radiation, and some amount of ultra-violet light on the high end of the ultra-violet spectrum. The key element here is the wavelength of the radiation type.
In my home and work environment I long ago made the decision to completely steer clear of WiFi. You might not feel you want to go “the whole nine yards” on this. Here are some ways you can reduce the burden of radio frequency radiation from WiFi on your body. You can pick and choose from this list according to how much you want to reduce WiFi radiation exposure in your life.
Now, what if I took that already precious treasure and stuck it in case that substantially increased the accumulation of value in one place by adding my driver’s license, MetroCard, ATM card, and credit card to the package? What if such a case made it possible to combine the pain of losing my phone with the inconvenience of losing my wallet in a brief moment of carelessness? We need not wonder, because that’s exactly what a wallet case does.
Conclusions: Based on the extensive body of research and the adverse health effects demonstrated in the majority of the studies, it is recommended that steps should be taken to minimize RF radiation exposure in accordance with official recommendations. Wired solutions should be given preference. Current exposure limits and SAR values do not protect from health risks associated with Wi-Fi radiation. The adverse effects on learning, attention, and behavior serve as a basis for educational institutions of all age groups to forgo the use of Wi-Fi applications. Due to cytotoxic effects, Wi-Fi technologies are not suitable for hospitals and telemedicine. Wi-Fi technologies should not be used in bedrooms, work spaces, common lounges, hospital rooms, lecture halls, classrooms, and public transport. The possible risks associated with Wi-Fi radiation could be avoided by testing alternative technologies at other frequency bands like optical VLC/Li-Fi technologies (visible light communication). When Wi-Fi cannot be avoided as a transition solution, the ALARA principle must be applied: no continuous transmission, instead Wi-Fi networks that can be turned off and feature dynamic power management.
AutomotiveCar Care,Car Electronics,Car Safety & Se...9710 ElectricalBatteries,Extension Cords & Power Strips...2672 Fire Pits & Outdoor Heaters162 Grills & AccessoriesGrill Covers,Grilling Accessories,Grills...966 Hand & Power ToolsHand Tools,Power Tool Accessories,Power...6849 Heating & CoolingAir Conditioners,Dehumidifiers,Draft Sto...1799 Home ImprovementAppliances,Bathroom Faucets,Building Mat...12707 LightingCeiling Fans,Fixtures,Flood Lights & Sec...2879
Since the development of communication devices and expansion of their applications, there have been concerns about their harmful health effects. The main aim of this study was to investigate laptop thermal effects caused by exposure to electromagnetic fields and thermal sources simultaneously; propose a nondestructive, replicable process that is less expensive than clinical measurements; and to study the effects of positioning any new device near the human body in steady state conditions to ensure safety by U.S. and European standard thresholds. A computer simulation was designed to obtain laptop heat flux from SolidWorks flow simulation. Increase in body temperature due to heat flux was calculated, and antenna radiation was calculated using Computer Simulation Technology (CST) Microwave Studio software. Steady state temperature and specific absorption rate (SAR) distribution in user's body, and heat flux beneath the laptop, were obtained from simulations. The laptop in its high performance mode caused 420 (W/m2 ) peak two-dimensional heat flux beneath it. The cumulative effect of laptop in high performance mode and 1 W antenna radiation resulted in temperatures of 42.9, 38.1, and 37.2 °C in lap skin, scrotum, and testis, that is, 5.6, 2.1, and 1.4 °C increase in temperature, respectively. Also, 1 W antenna radiation caused 0.37 × 10-3 and 0.13 × 10-1.
We’re living in a wireless technology age, but there’s some evidence that exposure to electromagnetic radiation from cell phones and wireless devices could increase your risk of certain cancers and tumors. However, more research is needed. In the meantime, I recommend practicing the precautionary principle. Some great cell phone safety tips include:
Results Renal tissue malondialdehyde (MDA) and total oxidant (TOS) levels of pre-natal group were high and total antioxidant (TAS) and superoxide dismutase (SOD) levels were low. Spot urine NAG/creatinine ratio was significantly higher in pre- and post-natal groups (p < 0.001). Tubular injury was detected in most of the specimens in post-natal groups. Immunohistochemical analysis showed low-intensity staining with Bax in cortex, high-intensity staining with Bcl-2 in cortical and medullar areas of pre-natal group (p values, 0.000, 0.002, 0.000, respectively) when compared with sham group. Bcl2/Bax staining intensity ratios of medullar and cortical area was higher in pre-natal group than sham group (p = 0.018, p = 0.011).
On the opposite side of things, we have non-ionizing radiation. This radiation does not have enough energy to ionize atoms, and includes everything else on the radiation spectrum including infrared radiation, visible light, and radio waves — including everything from the kind of low-energy radio waves we use for walkie-talkies to higher energy radio waves like those in the microwave portion of the spectrum.
The present study was designed to investigate the possible DNA damaging effects of low-level microwave radiation (900, 1800, or 2450 MHz for 30 days) in brain of Fischer rats. Researchers demonstrated DNA damaging effects of low level microwave radiation in brain and concluded that low SAR microwave radiation exposure at these frequencies may induce DNA strand breaks in brain tissue.
SafeSleeve's report is right up front about showing that they do not test or certify the Safe Sleeve case, rather they are simply testing the material they put into the case in a completely artificial environment, in a laboratory setting, using a signal generator and a power amplifier. Safe Sleeve includes photos showing how the measurements are taken. But that may not be how anyone will ever use their phone.